Model 70D-S

Model 70D-S

Wire Stripper

View Model 70D-S Sales Sheet » View Model 70D-S Operator's Manual »

The Model 70D Single Swing Blade Rotary Wire Stripper comes equipped with a P/N 1877 Single Blade Face Plate designed for end stripping a wide range of extruded insulation types. The machine’s rotary blade action provides a clean square strip that leaves the inner conductor strands neatly twisted. With adjustable blade depth, strip length and interchangeable wire guides, changeover from one wire to another is quick and simple. The production rate for most wire types is limited only by the speed at which the wire is fed and withdrawn from the machine. The Model 70D Single Blade Rotary Wire Stripper is a production machine that offers optimum efficiency when fully automated equipment is not warranted. This machine comes Standard with a durable Powder Coat Finish, 1 Year Limited Warranty, (1) P/N 1877 Single Blade Face Plate and (1) P/N 1700 Wire Guide of your choice. Operation The wire is fed into the machine through the wire guide bushing until it contacts the adjustable strip length stop. During this action the wire pushes on the back side of the spring loaded carbide stripping blade, swinging it open. As the wire is drawn out of the machine the carbide stripping blade returns to it’s closed position, cutting the wire insulation to a controlled depth at the desired preset strip length. Application note For wires with very thin wall insulation, shielding or non-rigid construction. Please refer to the Model 70D Twin Swing Blade Rotary Wire Stripper, as this model may be better suited for your application.

Free Wire Stripping
Wire Size .028" to .201" Insulated OD (.7mm to 5.1mm)
Wire Guide Sizes 18 Standard Sizes .028" to .201" (.7mm to 5.1mm)
Strip Length 3.00" Max (76.1 mm) Depending on Material
Stripping Head 1877 Single Blade Faceplate
Blade Type Carbide PN 1780
Blade Spring PN 1728 .024"
Voltage 115 or 230VAC, 1.4 or .7 Amp, 50/60Hz
Dimensions 6.125" H x 4.75" W x 11.75" L
Warranty 1 Year Limited Warranty
Weight 8.5 lbs.
Made in the USA
  • Solid Cast Aluminum Construction
  • Single Blade Adjustable Stripping Head
  • Carbide Stripping Blades
  • Dual Wound 115/230 Volt Motor
  • Durable Powder Coat Finish
  • 1 Year Limited Warranty
Made in the USA
  • None
Made in the USA

Model 70D-S #1877 Single Blade Face Plate Wire Guide List

Part No. Size
1700028 .028
1700032 .032
1700036 .036
1700040 .040
1700046 .046
1700052 .052
1700059 .059
1700067 .067
1700076 .076
1700086 .086
1700098 .098
1700110 .110
1700120 .120
1700136 .136
1700152 .152
1700169 .169
1700185 .185
1700201 .201

Select wire guide(s) with the smallest ID that slips freely over the insulated OD of the wire to be stripped.

All features subject to change without notice.

© 2023 Carpenter Manufacturing Company, Inc.

© 2023 Carpenter Manufacturing Company, Inc.

110 Fairgrounds Dr. | PO Box 188 | Manlius, NY 13104-0188 USA | Phone: (315) 682-9176 | Fax: (315) 682-9160