Model 850

Model 850

Material Coiling Unit

The new Model 850 Material Coiling Unit neatly coils long lengths of flexible wire and cable. When interfaced with applicable Carpenter measure & cut or measure, cut & strip equipment the Model 850 will automatically start and stop, allowing for seamless operation. This machine utilizes an easy-to-use electronic control that manages coiling bowl speed, discharge spin time, and restart dwell time. The Model 850 also operates with competitive equipment in manual operation mode, engaging with either the press of a button or with an optional foot switch.

To ensure safe operation the Model 850 has built-in protection circuitry that stops the coiling bowl if a jam or overload is detected. When processing long lengths of flexible wire and cable the Model 850 is the perfect solution for neatly controlling material output. Designed and manufactured in the USA, every Model 850 is sold standard with a durable powder coat finish and a 1-year limited factory warranty.

Free Wire Stripping
Maximum Material Diameter 0.375" (9.5 mm)
Minimum Material Length 72.0" (1,829 mm) [Dependent on Coil Diameter]
Finished Coil Diameter (Standard) 6.75" (171.5 mm)
Finished Coil Diameter (Optional) 4.5" (114.3 mm) & 8.5" (215.9 mm)
Maximum Finished Coil Diameter 12.0" (304 mm)
Maximum Coiling Speed 175 RPM
Input Material Exit Tube Height 35.25" (895.3 mm) to 44.25" (1,123.9 mm)
Electrical Connection 115 VAC, 60 Hz, 2 AMP (Standard)
230 VAC, 50 Hz, 1 AMP (Optional)
Dimensions 16.5" (419.1 mm) x 35.25" (895.3 mm) to 44.25" (1,123.9 mm) x 16.0" (406.4 mm) [W x H x D]
Weight 50 Pounds (22.7 Kilograms)
Warranty 1-year Limited Warranty
Made in the USA
  • None
Made in the USA
PN 8663 - Foot Switch Assembly (for use with competitive material processing equipment)
PN 9511 - 4.5" Coiling Bowl Ring
PN 9520 - 8.5" Coiling Bowl Ring
PN 9585 - Foot Switch Assembly (for use with Carpenter Model 36A/36B, Model 93, or Model 97A)
PN 9599 - Foot Switch Assembly (for use with Carpenter Model 360, Model 930, or Model 970)
Made in the USA

All features subject to change without notice.

© 2024 Carpenter Mfg. Co., Inc.

© 2024 Carpenter Mfg. Co., Inc.

110 Fairgrounds Dr. | PO Box 188 | Manlius, NY 13104-0188 USA | Phone: (315) 682-9176 | Fax: (315) 682-9160